Oppo F1 soft-bricked totally (white line in top of screen)

Hello.. I need help for my oppo f1
I just tried to flash project spectrum and its lasted for more than 30mn showing that bar which says thats only 1mn remaining.... So after a lot of patience i force-rebooted my phone and it seems soft-bricked by showing a white line in the the top of the screen with the oppo's logo in normal boot and the recovery boot and the only thing that i can access is the fastboot menu
Need to urgent help please
Image: http://imgur.com/suVsLQ9

Oneplus ONE screen problem (Part of screen not working)

Hello,

After i bought the Oneplus ONE, i experienced some screen issues
As you see in the screenshot, a part of my screen isn't working,
there aren't any marks on the screen and the screen isn't cracked.

link is:
h ttp:/ /imgur. com/a/YdQ28
i added a space because i cant add links

I hope there is a solution.

thanks

Kyllian

Should I try to save my black screen nexus 4?

Hello people.

I need help to decide if I should try to save my nexus 4 or not. It has been dismantled for the past half a year and i recently got it to show signs of life after battling the steady red ring of death. (Was simple by the way, just used a wireless charger for a couple of minutes) But if I turn it on, it vibrates, the screen lights up and that is just about it. So i have no idea if the phone itself is functional. Some of you might tell me not to bother with such an old phone, hell, they aren't even sold anymore. But this phone has stuck by me through thick and thin, and has a sentimental value. I nearly jumped of joy when it showed signs of life after such a long time. I am not a rich man, so i need to manage my finances. Screen replacement would cost me 25 pounds, back housing would be another 10, but what if the phone is still not functional? Is there any way I can find out if I should take the gamble?

Some info -
I am not entirely sure if there is an OS currently installed on the device, as I was experimenting quite a bit before the battery run its coure.
I am also missing one of the connector things that are circled (there is one and a broken spot where another one should be) but i have no idea what it connects to. The little peg itself is safe and sound in my possession, if it can be welded back. It connects to whatever is under the power button on the back housing.



The screen is cracked in three places, but was working the last time I remember. But there have been many (and I mean many) dis and re assemblies since then.

I probably love this phone more than my friends and family. Just want my favourite piece of tech to be my companion again.

google play music pausing when screen turns off, and other issues

I'm using stock marshmellow from lg. google play music pauses the song when the screen turns off. usually between 30 seconds and 2 minutes after the screen turns off. I'm not exactly sure if it pauses the song or the audio just cuts off. I've added google play music to ignore battery optimizations and that didn't help.

another issue I'm having is after I reboot the phone, play music doesn't detect my songs. the sd card is mounted but there is no music in play music. sometimes remounting the sd card doesn't work and I have to reboot. also, after rebooting, my playlist is empty.

Htc M8 Sprint Version Error Screen Problem

hello All my Dear Boss & XDA Devloper
I face this in htc one M8 mobile
it doesn't open normal anymore and when it open it just show me the welcome screen n stop on it and when i try to reset factory it says this error to me at th welcome screen also

this build is for development purpose only Do not distribute outside HTC without HTC`s permission
failure to comply may lead to legal action


i don't know what happen or how i can fix this so please if you can help me BIG thanks for ALL developers

monoar30@gmail.com

[HELP] Sony zr cant show home screen (only blank screen)

Hello im nub on sony zr and i try to root my zr . But when my phone reboot after update binary super su and only blank screen . But when i hold press power , power off, restart still there and can touch .
Please if someone can help me

Damaged screen and touch panel

I have an LG G3 D851 and I recently dropped and cracked my screen and damaged the touch panel. The touch response is non-existent. I don't plan to repair it but I need to extract the contents of the built-in storage. I already removed my micro sd card and of course the contents are safe. Here's my problem: I don't have USB debugging enabled, as I haven't needed it. The USB connection when hooked to my computer is set to charge and not mtp or ptp. I can't change this therefore my computer doesn't recognize the phone as a mass storage device. I have tried a browser add-on called Vysor to no avail. I have downloaded the necessary ADB drivers for my PC, I have downloaded LG's drivers, I have even installed Android Studio and the SDK. I read that a USB OTG adapter would solve my issue but I don't really want to go that route unless I absolutely have to. What I am asking is if any of you kind people know of a possible alternative solution. Thank you in advance.

Galaxy S5 SM-G900V Samsung Account Lock: No WIFI to Choose at the Wizard WIFI Screen

I bought this phone which was freezing up. I thought that a firmware upgrade would do the trick. However, there was a Samsung Account of the phone and I was not aware of. The phone goes to the first set up screen, asks me to connect to WIFI but there is not WIFI providers to choose from. I click in the refresh WIFI list and the phone asks me to turn on WIFI. However, I do not have access to the WIFI on/off switch due to Samsung account lock. After a couple minutes the phone would again freeze up. Sometimes it restarts or it would simply stay in a black screen. I have to remove the battery and start the process all over. I have tried re-flashing via ODIN . I update the phone via Verizon Software Assistance to the latest firmware Marshmallow G900VVRU2DPF4. But I downgraded to G900VVRU2BOE1 Lollipop 5.0 firmware now. I also tried removing the account by flashing the modem.bin file but I get stock in the same spot. Guys, please help!

Attached Thumbnails

 


 


 


 

Anyone replaced a screen on one of these?

Sorry, I know this is a developer site, but I'm at a loss here.

I have a Verizon M8 for Windows that had a dodgy touch screen. Everything else worked fine. I purchased an LCD/digitizer and installed it. LCD wont come on. Phone powers on, syncs to PC, I can navigate around by taking screen shots and viewing on the PC, so I know the phone is working ok.

So, I purchased a 2nd screen, thinking the 1st one might be faulty. Same thing. No LCD. If I plug the original LCD in, it lights up fine (I cracked it removing the digitizer, so can't re-use it).

Next, I purchased a good, tested 2nd hand motherboard (Verizon, For windows) thinking I may have damaged the LCD connector. Still no LCD display.

Does anyone know if the screens are specific to either the Verizon or Windows Phone versions? Or anything else I might be missing? I've been repairing phones for years (mostly iPhone, Samsung, Lumia) so I'm not new at this.

Regards.

how to bypass samsung account screen galaxy note 4 6.0.1

i need to bypass the samsung account screen on a galaxy note 4 running 6.0.1
someone please help

How to backup contacts with broken screen + disabled USB debugging?

Hello everybody,

my wife has just broken the screen (and appearantly the digitizer) of her S3.

Of course the USB debugging has never been enabled ever since I bought this phone for her.

So my question is this: how can I backup the contacts without a working screen and disabled USB debugging? Is there a way? Can I enable USB debugging via ADB? The ROM in question is fully stock.

Thanks in advance for any helpful insight.

Galaxy S5 Stuck On Splash Screen with Set Warranty Bit: kernel ---please help

First post, So hey everyone :D

So I rooted my phone around 6 months ago with CF Auto Root, everything went fine but i was still on stock ROM. So then i found the Alliance ROM and decided to flash that because it looked cool. I flashed it using FlashFire to ensure I keep root. Everything worked and booted just fine, really smooth and of course it looked awesome. One small problem though, I could not send messages but I could receive them. Probably a SMSC (that was around 3 hours of head ache attempting to fix that) issue or because Straight Talk didn't like my phone using Android 5.0. So then I tried downgrading to Alliance 4.4.2, NOPE. That was the end of my phone :'(

Im now stuck on the Galaxy S5 screen with "Set Warranty Bit: Kernel" in the top right. No idea how to fix it and obviously knox was tripped but that isnt a huge deal to me.

I have tried the following.

1. Tried to reroot (seemed to fix a lot of issues actually)

2. Tried to reflash Alliance ROM android 5.0

3. Multiple cache and system wipes.

4. Installed TWRP through Odin but thats useless because I was dumb and deleted my back up in the system wipe :(

Im currently downloading stock ROM but my hope for that is fading judging that TWRP even stalls out and the phone reboots right when it attempts to flash.

What i have access to:

1. Recovery

2. Download

Is my phone already 6ft under or is it hanging on for dear life?

Thanks for the help!

screen protector

Hi,

I have recently purchased a p9 lite and I was planning on putting a screen protector on it, however it seems like to me that something is already on it by default (at least it was like this straight out of the box). See the pictures attached. Is it something I should remove before applying my own protector? do I even need one with this pre-applied?

Unfortunately I cant embed outside links in my message directly because of the forum policy, but here are the links (replace the dots):

www dot starfleet dot hu/rhorvath/p9_top.jpg

www dot starfleet dot hu/rhorvath/p9_bottom.jpg

Case Friendly Screen protectors in the US

Since there are too many glass protectors and many people here recomending products from the India, I think It would be useful for us in the US
to know which alternatives we have for "CASE FRIENDLY" screen protectors or full covered tempered glass that we can buy in amazon.com or ebay.
Many sellers claims that most works with cases but real users opinions is what counts. I have the oficial op3 slim case.

Xperia L black screen

Hey! When i install CM 12 / CM13 and Ressurection im getting blackscreen [phone didnt work, only power button, cmw too didnt work.] Please help me, i need new system because my is old.

GT-N8000 stuck on Kies error screen

I got this Galaxy Note 10.1 a few years ago. Last year I decided to flash Gnabo Rom v7 on to my GT-N8000. The Rom was working for almost a year, until, when I tried to boot my device, it showed the cvm custom recovery thing.
So I just rebooted the device from the cvm, and it showed the Samsung logo animation. However, it was stuck on the animation for over a couple of hours, so now I can't use my device.
A few days ago, I tried some youtube tutorials on how to unbrick/unroot my galaxy note 10.1.
First I tried putting it in download mode and flashing a factory firmware(samsung) using odin 3, v1.85. I click on PDA and opened my rom. I clicked start. (I didn't touch anything except for PDA.)
The Progress was successful until the system.img part. It got stuck for a couple of minutes on system.img and then failed. I tried doing it again and using different usb ports but it still failed st system.img.
After that, I tried clicking on Bootloader instead of PDA, but it still failed on the system part.
Now my tablet shows the "Firmware Upgrade encountered an issue. Please select Kies in recovery mode & try again."
I could get into download mode but not recovery mode. (nothing happens when I hold power button)
Any help would be great. Thanks!!!

Replacement Screen Help

I've carried out a screen replacement using a part that was advertised as a genuine OEM replacement part, but I've got a few issues with it and I wanted to know what other people thought.

The new display has some shadowing around the edges, and suffers from screen burn after only a few minutes on a static image. It is also noticeably duller and less vivid, and seems to have a bluer tint than the original.
The colour I thought I might be able to make acceptable with a colour temperature app, but a new screen shouldn't have shadowing or screen burn, especially not an OEM one, right?

I suspect the part is a knockoff. It has the LG logo and a similar, but certainly different, crosshatch design on the bezel. I wouldn't mind this though if the screen quality were better.

Am I likely to have these problems with any replacement screen that is not an original? Has anyone bought a replacement screen that is of a similar quality to the original?

S5 Screen black (but worked in download mode)

Hi,
so my S5(SM-900F) shows a black screen, but is otherwise functional. I don't know if it's a software or hardware issue, neither really makes sense to me.
Here's whats happened:

1. I wanted to flash cyanogenmod, phone seemed functional


2. Tried to flash twrp (3.0.1) with heimdall, got a bunch of errors


3. Tried a bunch of stuff, got it to flash twrp using heimdall-git


4. Phone got stuck in a boot loop


5. At this point I was annoyed and decided to reset it, which I did with kies

Here's where the screen issue started. After booting the screen was black. Phone showed S5 logo upon startup, download mode worked fine.
Touchscreen worked (managed to activate Talkback. In Hungarian), so the hardware seemed fine.

1. Googled and tried the million tips to fix a black screen, nothing worked


2. Screen randomly worked until reboot/lock


3. Fully charged the battery, screen worked until battery was at 70%, then black screen after locking with power button

Here's a kernel log from around that time:
dmesg
Nothing sticks out to me, log shows the backlight being adjusted which might be related.
This is the log I saved however, when I looked at it in the console I saw a few more things (see below)

1. Hoping it was a weird software issue I tried to flash cyanogenmod again, this time got into recovery (had to hold Vol Up+Home for more than half a minute), but got "kernel not seandroid enforcing" upon boot, then black screen and periodical vibration


2. Reset again


3. Wanted to see whether the screen would fail after some time in download mode, worked until battery was empty


4. Suddenly the screen's black in download mode, too, even though it worked for days

Here's a current bugreport.txt containing

Code:

---

***
<6>[  157.910750] mipi_samsung_disp_send_cmd: get_my_check(0)!
<6>[  157.910764] mipi_samsung_disp_send_cmd: get_my_check(0)!
<3>[  157.910772] [mdnie lite] is negative Mode On = 0
<6>[  157.910780] mdss_dsi_cmds_send: get_my_check(0)!
<3>[  157.910791] [mdnie lite] mDNIe_Set_Mode end , UI_MODE(0), DYNAMIC(0), OUTDOOR_OFF_MODE(0), ACCESSIBILITY_OFF(0)
<6>[  157.910801] mdss_dsi_panel_on : --
<6>[  157.911850] mipi_samsung_disp_send_cmd: get_my_check(0)!
<6>[  157.911858] mipi_samsung_disp_send_cmd: get_my_check(0)!
<6>[  157.911867] mdss_dsi_cmds_send: get_my_check(0)!
<6>[  157.911874] mdss_dsi_cmds_send: get_my_check(0)!
<6>[  157.911880] mdss_dsi_cmd_receive: get_my_check(0)!
<6>[  157.911887] read_reg : A[1] : .
<3>[  157.911893] Error reading LCD NV data count(-19), read_size(1)!!!!
<6>[  157.911900] mipi_samsung_disp_send_cmd: get_my_check(0)!
<3>[  157.912839] Panel has gone bad, sending uevent - PANEL_ALIVE=0
<6>[  157.912847] DISPLAY_ON
<6>[  157.912862] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[  157.912890] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<6>[  157.928517] __mdss_fb_perform_commit: kickoff done!
<6>[  157.928534] mdss_fb_update_backlight: mfd->bl_level (255), bl_updated (0)
<6>[  157.928546] mipi_samsung_disp_send_cmd: get_my_check(0)!
<6>[  157.946943] mdss_fb_blank_sub: FB_NUM:1, MDSS_FB_UNBLANK ++
<6>[  157.946959] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[  157.946977] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[  157.947007] mdss_fb_blank_sub: FB_NUM:1, MDSS_FB_UNBLANK --
<6>[  157.950265] hdmi_edid_sysfs_rda_modes: '4,19,32,33,34,3,18,1'
<6>[  157.951605] hdmi_tx_get_vic_from_panel_info: 1920x1080 p30 16/9 is supported
<6>[  157.951622] mdss_fb_blank_sub: FB_NUM:1, MDSS_FB_BLANK ++
<6>[  157.951799] mdss_fb_blank_sub: FB_NUM:1, MDSS_FB_BLANK --
<6>[  157.951809] mdss_fb_blank_sub: FB_NUM:1, MDSS_FB_UNBLANK ++
<6>[  157.951819] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[  157.951831] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[  157.951964] mdss_fb_blank_sub: FB_NUM:1, MDSS_FB_UNBLANK --
***
<4>[  158.012453] WARNING: at /home/dpi/qb5_8814/workspace/KLTE_EUR_OPEN/android/kernel/drivers/video/msm/mdss/mdss_mdp_util.c:105 mdss_mdp_set_intr_callback+0x10c/0x12c()
<6>[  158.012461] replacing current intr callback for ndx=8

---

Those I also saw before the previous dmesg.
The -19 read bytes seems especially dubious, from a quick look at the source it does not seem like an errno, don't know if it's related to the problem anyway.

Current Android version: 6.0.1
Kernel: 3.4.0
Build: MMB29M.G900FXXS1CPG9

So what's going on? Is this some weird hardware issue? Do the ways download mode and android control the screen differ? What difference does the battery make?
Is it software? Both?

I've searched the forum and found e.g this, but nothing that helped me out.

Thank you for your help,
NoR8quoh1r

Stuck in Recovery screen

Hi everyone

I have a problem with my son's samsung galaxy s3 gt-I9300
He wanted to update the firmware to 4.4 kitkat and I don't know what he did but the phone is now stuck on the recovery screen
I've googled for hours for a solution and finally decided to ask for help
I've removed the battery and held power for 1 minute in case there was static somewhere.
Every time the phone is switched on it goes straight to the recovery screen.
I tried wipe cache partition and that didn't work and then tried a wipe data/factory reset and it's still not working.
As far as I know he installed odin and CWM.
If anyone could just help me get into the OS again that will be more than enough

Thanks in advance

Unresponsive Touch Screen. Some Ghost Touches.

Hi,
My TF300T stopped responding to my touches and has some ghost touches now occurring just under the ASUS logo in the bezel. Has anyone else experienced this and can offer a fix? Is this a shot digitizer?

FYI, I've tried a cold start, cleaning the screen, and resetting the tablet using the small hole on the left. None of those worked. The track pad still works so I can still use the tablet as a netbook, but that sucks.

Any other suggestions?