why cant i underclock the CPU?

Every time u try to underclock the CPU as soon as I leave the app the sliders go back to where they were originally. Even after applying on boot. Am I doing something wrong?

Can't find ROM for my huawei Phone

Hello,

I recently received a Huawei GR3 Dual SIM LTE TAG-L23 that was soft bricked. apparently someone tried to flash a ROM from a different model (TAG-L21 or TAG-L22) with no luck. i have been searching for a while to find a custom/stock ROM, but i haven't been able to find even one. i even tried the huawei pages, but there wasn't even a mention of this model.

Can someone please help me to find a ROM that this model can use? thanks in advance

Can't get the phone to recognize data connection through USB port

Sadly i had to come to the painful conclusion that my problem relies at this point on the data detection of the phone itself.
I have read tons of tutorials pointing to adb or fastboot upgrades and different stuff and methods to update. I'm stuck in 2.20.40.139 and cannot find an update within the OS. I will enumerate now the things i see in order to clarify this situation.

_USB debugging on or off makes no difference.
_MTP or the other mode returns nothing. No detection on device manger in windows.
_Phone always charges when plugged to USB ports.
_Tried 4 cables and 3 pc's all of them tested with other phones and tablets.
_On fastboot mode nothing happens and device is nowhere to be found.
_ADB is the same. adb devices shows nothing for this.
_Recovery returns an error as if it tries to update something that isn't there MOFD_SUPDATE.zip
_after that error i get into recovery pressing power+vol up for a few seconds.
_did a factory reset on the phone and wipes in recovery.
_copied file in root of the phone. Detected the update. failed when trying to apply.
_bootloader in fastboot shows unknown. serial is 0123456789ABCDEF or something like that (serial was ok before i used the bootloader unlocker from ASUS website)


i can't think anything else for this right now... it's really driving me crazy since android works without an issue. Phone is not rooted or even has been tried to root.

If someone knows or can think anything regarding this please help me out. There's nothing i like more to share thoughts and ideas to have this updated.

Thanks in advance,

[HELP] Sony zr cant show home screen (only blank screen)

Hello im nub on sony zr and i try to root my zr . But when my phone reboot after update binary super su and only blank screen . But when i hold press power , power off, restart still there and can touch .
Please if someone can help me

Can't access bootloader

Hey XDA!

This is my first post so I'm sorry if I'm not providing enough info here. Earlier today, I was trying to root my Nexus 5, and I was using the Nexus Root Toolkit by WugFresh. When I swiped to reboot my phone, everything was going well until it started to continuously turn on and off when the Google logo showed up. I tried to get into the bootloader, but the bootloader only loaded for 2 seconds before restarting into the Google logo once again. This means I can't flash the stock factory image onto it.

Any help will be great and further info can be provided upon request!

Thanks a ton!

Rup Roy

Stuck on TWRP, cant ADB or Download mode

So I've been messing around with this phone and I've gotten it stuck in TWRP before, but that version had a download mode option and I was able to fix it using odin + the default firmware. This version doesnt seem to have it. My phone is unrecognized by my PC (previously it was), I can't seem to use universal drivers, and ADB reports no devices connected. I have an SD card so I was wondering if there is any way to fix it using that? TrapKernel is also installed. I don't have access to an OTG cable but I'm assuming its my only option? Thank you in advance.

tried this said it was not found. (tried multiple times)

Code:

---

dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc

---

Phone: Galaxy core prime sm-g360t1
TWRP: 3.0.2-0

Can't get the bootloader to unlock! Keep getting this error!

Not a noob and this is driving me crazy! Any help would be greatly appreciated..





Sent from my Robin using Tapatalk

Cant activate USB Debugging

I have a S5 NEO with SOTI Mobicontrol installed on it, I cant turn my phone in downloadmode and I cant activate USB debugging, its greyed out. I cant uninstall SOTI it looks that only an administrator can uninstall it :(

Cant flash rom with gapps.

Hi guys, need some help please. I unlock my bootloader, install the recovery, and next i install the CM13 in my LG G4 H815. The problem is :

If i only install the CM 13, its everything ok...if i install the CM and the gapps, the phone dont work...start rebooting automatic in the launch configuration ( wifi settings etc )

What can i do ? I do every time factory reset, and wipe cache etc etc, but dont work...only if i flash cm 13 without gapps.

cant get twrp work, everything is fine, upload ok , cant reboot to recovery

Drivers installed, flashtool working, upload OK (green screen) , but when i try to reboot, (volume + and power) it is not opening recovery mod, but it reguraly start up the phone without jumping to TWRP - got 20160608 rom . Is there any other way to get root so i can install eragon rom ?. Thanks for help.

S6 Bricked (Can't get into recovery, not detected in Odin)

I have a Samsung Galaxy s6 (GM-920F I believe) and after a OTA update to the Marshmallow firmware, it fails to boot up on the Samsung logo (it displays it but doesn't make the sound) and I cannot use the volume keys to access recovery (or download mode). In addition it isn't detected by Odin on vairous PCs (and I've used lots of different micro USB ports). Any help would be appreciated. Thanks

Cant flash Roms

Hello guys,

first sry for my english i´m from germany^^.
so recently i tried to flash a new rom on my OnePlus 2 A2001. This didn´t worked for me and i bricked my devices. so i started to flash the original Oxygen 3.0.2 with stock recovery etc. with the qualcomm programm and it worked. then i unlocked bootloader, flashed twrp 3.0.2-2 and then i rooted.
So then i tried to flash a new rom. With ervery Rom Im getting status 7. Alright then i deleted the asserts in the rom but i even get this error. not even to delete the updater-script worked for me.
So actually overall i cant flash any rom and i need help.
Tanks for every respond.

Lenovo A6000 plus stuck on MI Logo and I can't enter into the cwm ..Please help

Hello Friends..
Yesterday I tried to flash CWM using TWRP... After that I dont able to enter into cwm or twrp mode :rolleyes:
Now Im stuck on Mi logo but I can enter into fastboot mode so I tried to flash CWM using Minimal fastboot but my device not detected :confused:
Please help

Can't get PIA VPN working on CM12.1?

I have just exhausted PIA's tech support and still neither the PIA vpn client nor openvpn seem to work properly on my i9100. They both install just fine, and seem to connect, but I check and my IP address is the same as it was before, and then I go to the PIA site and it confirms that I am "not protected". I have tried different ports and checking a variety of settings (hopefully not all of them) and nothing so far.

Is anyone else using PIA on the i9100 with CM12.1? If yes were you able to get PIA up and running first time or was there something you had to do?

Anyone else that has thoughts about how to get this going would *really* be appreciated!

NEED HELP! Can't tell what's wrong with my Galaxy S3!!

Let me start with some details about the phone:

- It's a Sprint Samsung Galay S3, SPH-L710
- It was rooted and Cyanogenmod was installed successfully, no problems
- Phone was given to my aunt, and she used it for a while

Here's the problem:

A little while ago, she told me the phone turned off and wouldn't turn off again. I told her to charge the phone and see if that helped. She charged the phone and waited for the battery animation to show up full, and then turn on the phone. It booted past the Galaxy S3 logo, past the animated purple Samsung logo, got halfway through the Sprint 4G LTE boot animation with the music and then boom. Shut off. And then back to the battery charging screen but displayed the battery as if it was only 15% remaining. What?? Wasn't it full a minute ago???

Here's what I did to fix it:

Okay so I thought, it's a battery problem. I purchased a second battery from eBay (not OEM) and the same issue occured. Same exact thing happened. I looked up the issue online and it appeared to be a soft brick. I forgot exactly what I did but I downloaded a recovery file and flashed it via ODIN and it turned on. Phew.

I gave the phone back to my aunt and a week later, the same thing happened. Phone dead. Won't start. Won't get past the Sprint boot animation. So I thought to myself, hmm ok. I'll just reflash and do what I did before. But I mean, how often do I have to keep doing this? And she loses data every time I have to flash the phone.

And so I did. I put it into download mode, opened ODIN, browsed for the md5 file (I forgot what file it was, I'm mad at myself for that now) and flashed the phone. It flashed successfully but this time, the phone wouldn't turn on. It kept vibrating as if it's about to turn on but then dies immediately. I left the phone on my desk for a while and all I could hear was *bzzt* [pause] *bzzt* [pause] *bzzt* and I'm thinking, okay. Time to get an OEM battery.

I finally found an original Samsung battery from an authorized Samsung dealer, I was pretty surprised he still had the battery in stock and bought it from him and ran home. Still the same thing. Kept buzzing but won't turn on. And if I do turn it on, it won't get past the Sprint boot animation.

So I looked and looked and looked and looked online and found this: http://forum.xda-developers.com/show....php?t=2755793

Long story short, I followed the instructions, flashed successfully with no errors, and now I can boot past the Galaxy logo, boot past the Samsung logo, and finally past the Sprint boot animation until I landed on the Samsung screen. Just a black screen with Samsung that seemed to have a glowing purple around it. I was getting excited. After about 10 seconds, it went to the main welcome screen (the Google setup thing) with the next button and the language selector in the bottom. I was on that screen for about 2 seconds AND THE PHONE TURNED OFF. Back to the battery screen.

What am I doing wrong? Is there something wrong with the phone? Battery? Am I flashing the wrong software? If so, can someone please direct me to the right place?

P.S. If you're thinking, "dude just get her a new phone" she does have a new one now. It's a Galaxy S7 but I really really want to know what's wrong with this phone and it's been annoying me lol

Cant flash some ROMS on Sprint S5

I just got an S5 with OG1 BUILD. Twrp recovery 3.0.2-2

Im having issues flashing roms. MOAR 7.0 gets to the aroma installer part n reboots. Nothing more. Cm13 gives error 7 code.

Im finding it difficult to find just exactly what roms the sprint S5 can run. I find a few but its kunda scattered. (Am i missing that section?)

Resurection Remix flashed just fine btw.

What can't FlashFire flash from Nexus 5X factory images?

I want to have a rooted stock Android Nexus 5X with stock recovery. I also want to keep my boot loader locked. But I've read that automatic OTA updates don't work on a rooted phone. Then I found out about FlashFire.

But I also read that FlashFire doesn't allow flashing of the radio and boot loader. Chainfire himself said "FlashFire can flash both bootloaders and modems on most Nexus devices. However, I would only flash the modem and not the bootloaders, to be on the safe side. Or, use the full size OTAs available from Google rather than the Fastboot package, and circumvent the issue (those flash both bootloader and modem if necessary, with less risk when doing the bootloaders)."

So I've got 2 questions:
1. Is it possible to flash everything, including the radio and boot loader on the 5X?
2. If the boot loader is flashable, what are the potential drawbacks of flashing it with Flashfire instead of fastboot?

Thanks

Can't factory reset Moto g xt1032

My phone is being slow lately so I've decided to do a factory reset. I own a Moto g xt1032. I did some stuff with ROMs but they didn't work and I gave up about that.

Whenever I try to factory reset via settings my phone shuts down and goes into some menu (forgot the name). I have the options recovery factory barcode etc. But my phone didn't factory reset or anything.

Then I read I need to go into recovery mode and choose to wipe everything. As always whenever I try to start recovery mode it just says "boot up failed"

I just want to reset everything and I don't need to backup as I don't really have anything special on here.

Thanks in advance

[Help] can't install custom recovery on Lenovo Vibe C at all!

Hello
A newbie here ...
My new phone "Lenovo Vibe C (A2020)" does not allow me to install any kind of custom recovery on it, I tried the following methods ...
1- SP Flash Tool: doesn't detect my phone at all, even after installing all drivers (Qualcomm, MTK, Etc ,,, ).
2- Adb and fastboot: whenever I try to flash a recovery, it only shows (waiting for a device) command, even after being detected by "adb devices" command, and showing device ID.
3- flashing apps: I used flashify and thrasher, at the beginning they both show a successful flashing process, up until rebooting to recovery, then only shows "Lenovo" logo for a second right before turning the phone off.
that's what i did, any help would be appreciated.
Note: the phone isn't even indexed in the site's database ... I wonder why!

Windows 10 cant detect TF101

Hi. Tryed on laptop and on desktop.

Windows 10 cant detect TF101. Already tried to install universal naked drivers.

No luck.

Any ideas? I need to unbrick mine. Thanks!