STUCK ON FLYME I am on flyme 5 global version. I have flashed custom recover via LOGO

I am on flyme 5 global version. I have flashed custom recover via flasify. after some tym phone switched of suddenly n get stucked on flyme logo. I am not sure whethere my debugging mode is on or off. The problem is now I am not able to get into recovery(stock & custom) mode. Only I can get into fastboot mode. But I have tried lots of fastboot commands to flash my phone but failed. every time it says booting...FAILED (remote: unknown command) or download for partition 'recovery' is not allowed. I went to my locaL repairing center but they failed also. Service center is too far from our locality.


Seeking for your help.. Kindly help me to get back my phone.

S4 motherboard from ebay flashed to MetroPcs. Flash back to Sprint?

The motherboard in my S4 went bad, so I bought a replacement off ebay. Got it in and it works, but it has been flashed to MetroPcs, and I need to get it back to sprint. I've already odin'd a stock sprint rom, and when the phone boots up it has the sprint logo, but no service. When I looked in the settings under username it was still a metro address.

How can I flash it back to sprint so I can activate it on my acct?

[HELP] iMEI Problem after flashed Stock ROM

i have an AQ4502 [Canvas A1]
after i go back to stock rom from CM13 now i cant access with NETWORK,
even flash any other ROMs,
my imei is not showing [*#06#]

i connect my phone to PC and its not showing my device [phone is just charging]

please help guys,
i bought my phone 8 days ago from Amazon.

factory reset cause bootloop on new firmware, unless flashed back to old one

so I had the phone originally on stock,
later I flashed custom roms, after using non official firmware I had decided I am done with that.
so I flashed the Latest official release from Samsung, however.

doing factory reset cause my phone to go into boot loop, unless I flash the original software via odin.
doing factory reset on the old software, works fine.


I am suspecting that factory reset restore an image stored on the phone (which happen to be the old one).
how do I make sure that factory reset works on the latest release.

thanks

Cant start my Samsung Galaxy S7 after I flashed with xposed PLS HELP ME

So I was going to install xposed on my Samsung Galaxy S7 and followed the instructions on devs-labDOTcom/download-install-xposed-installer-framework-android.html . I followed the instructions up to step 4 ( "Step 4. Select the zip & Install. Wait for the Installation to complete. Now, Wipe Dalvik & System cache. Reboot your device." ) and after I rebooted, my phone just shows "Samsung Galaxy S7". I cant get nowhere but it only shows this. Im really worried about my phone. Can anyone help me pls?

Flashed new ROM now phone won't boot up.

I flash Bliss ROM and wasn't getting 4G. Went to go restore my backup and TWRP said it can't because the system was read only. I went to mount option adn took system off read only, restored back up, but my phone wouldn't boot. So I booted back into recovery, flashed Pure Nexus, phone still wouldn't boot up. Tried another ROM, still nothing. Can't get the shome to boot back up.

Now when I go back into TWRP recovery and click on mount, System isn't checked. Did I mess something up? And how to fix?

Navigation not working after i have flashed cm13

Iam using a moto g2 2014 (falcon) my navigation is not working. Its saying searching for location

Please help me......

Sent from my Moto G 2014 using XDA-Developers mobile app

Sprint phone seems to be half flashed to Boost Mobile need help full flashing

I bought a LG G4 from my local Boost Mobile shop that was flashed from Sprint. He sold it to me at a very low price of 0 when it was 0 at the time because not even he could figure out why talk/text would work but not data. Wifi works perfect but when I leave my wifi spot or turn wifi off data is non-existent. I bought the phone from him knowing that data didn't work, and at the time I didn't need data, but now I do. It is a cdma phone because I see no slot, after taking the battery out, where a sim card would be inserted. Is there any possible way to get this phone flashed a second time to a full flash from a potential half flash? If so can you please give me a step by step guide, link a definite guide that WILL work, and or, a video that WILL work? Thank you in advance, and hopefully I can get this issue resolved because this phone, although not the latest, is a magnificent mobile device and I would sure hate to have to discard it because I can't get data on the go.

Try to fix Softbrick? with wrong flashed Firmware Xperia Z3

Hello XDA Team,

so to get exactly to the thing I try since 5 hours of searching and trying. I had Cyanogenmod installed on a Z3 (D6603) and wanted to flash is back to an original pre rooted Firmware. Stupid as I am flashed it with the ZIP for Z1 (C6603) because I didn't though about it much and overread it and then Wiped the Cache. After the "reboot" nothing showed up. Now I'm getting nothing, literally nothing. Screen doesn't show anything, no LED, and my PC cant find the phone. Already tried to reinstall the drivers from Flashtool.

To summarize: I cant get into Fastboot nor Flashmode but I can turn it "on" and shutdown with the Yellow Button.
I really just need to get into Flashmode to flash it with Flashtool.

Hope someone can help me, send a link to a thread I overlooked or say that I got a hardbrick.

If it doesn't belong in here I pls say me where I should post it instead. :silly:

Flashed Firmware S-ON

After an entirely random error saying my phone is somehow Encrypted, I went ahead and did a factory reset which didn't help. The phone was still booting into the same screen asking me for a code to Decrypt the data. So after some "quick" reading on these forums I've decided to RUU to stock. But the file I've chosen, even though it matched my version it was a Firmware, while the phone was S-ON. The device had never been Rooted or tampered with previously.

So now the phone does not boot at all. I've tried every button combination, but nothing seems to work. If I plug in the phone to charge the orange light flashes, endlessly. Even after I've left the device to charge for 6hours, the orange light still flashes.

When I plug in the phone to my PC, all I get it seems is this new device: QHSUSB_BULK, which shows with an exclamation mark next to it. I've read similar threads for different phones where they've unbricked devices while they were in this mode, is that even possible? I can hear Windows recognizing a device was plugged in, and if I press Power+VolumeUP, it will disconnect the phone and reconnect it, at least based on the sounds Windows is playing. The screen is Black at all times.

How badly have I bricked this device and is there any hope to revive it? Thanks to everyone who chimes in on this.

Flashed latest SU...bricked! Help!

So I had root working with SU. I updated to the latest SU using flashfire. It flashed and rebooted the phone, now I'm bricked.

I get "security error: This phone has been flashed with unauthorized software and is locked"

I can't get into Recovery or download.

I'm assuming I'm f*cked?

Please Help ME... flashed wrong kernel .......

im using MOVEES ROM V4.0 Beta 2 and i try to flash the new arter97 kernel for Galaxy S6 920i which was 21.1. i mistakenly downloaded the 925f kernel and flashed if. from that time on when i touch on left side of the screen it register the touch in right side... which is opacite side...(like a mirror)
if i type A in the keyboard it'll type as l or if i type Q in the keyboard it'll type as P....:confused::crying:

please help me...

Xperia3 dual sim, flashed miui rom from z1 on accident

Now pc wont recognize phone in fastboot or flashmode. It had a 48% charge and it did start up into a bootloop 3 or 4 times. thats why i thought i would be ok. Then I realized it was a rom for z1 and it quit startin g at all. it is recognized as something by pc, although it says device not recognized. no lights no nothing.

twrp flashed still boots to stock recovery

I flashed the twrp recovery and got pass msg in Odin .
Still when I try to boot in recovery l.it boots in stock recovery.
Anyone knows how to fix it

i want to use a zip file tp flash my gear2 which i had flashed it to android ware 5.1

but now i did not have rec to flash it and odin can not use zip file .I have Unzip the zip and i found some img but i still did not knwo how to use it ,pl help me

Hellppp Flashed a Custom Rom

I flashed Viper for my HTC one M9 and everything seemed to work exept two MAJOR problems
1:) Absolutly no videos will play "Please try again"
2:)No games that require advanced graphics will play at all. Crash to desktop

Didn't have any issues with this at all prior to flashing the custom rom

Any help you could provide would be amazing guys

HTC M7 cannot turned on after RUU flashed

I have an htc m7_ul with s-off. I tried updating to lolipop using PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.5 1_Radio_4T.35.3218.16_10.33Q.1718.01L_release_4588 03_unsigned.zip which failed in some parts of the flashing process and put my phone into RUU only mode.
After that I managed to flash M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227 .06_10.27.1127.01_release_308001_signed_2_4 which completed SUCCESSFULL without any errors. The phone rebooted and hopefully Htc quietly briliant logo appear and everything seems fine. Unfortunately this wasn't the case, the phone stuck in there. I try pushing several buttons power, power + vol up or power + vol down for several minutes but nothing. The phone was stucked on quietly brilliant logo. I waited until the battery fully drained and charge it for a while, I tried to start the phone again the phone couldn't boot up the only reaction it has is the capacitive buttons blinking whatever combinations of power buttons and volume buttons I used. The phone is not recognized in pc at all its like is completely dead (it is not even being detected in device manager) . Is there something I can to? I really tryed everything and search in forums for hours for an answer without any luck.

Flashed Xposed to Tab A,bootloop occured,TWRP recovery now says that there is no OS

Hello XDA,

Unlike you, (probably) I am relatively new to rooting and flashing. I rooted my Samsung Galaxy Tab A 9.7 (SM-T550) and flashed TWRP recovery (thankfully). I have attempted to flash Xposed framework to my device and was horribly unsuccessful. My device entered a bootloop and I went into TWRP recovery and stupidly, somehow, wiped my device of its OS. Now TWRP says "No OS Installed! Are you sure you wish to reboot?" and puts me into another bootloop each time I do. My device is no longer recognized by Odin, Samsung Kies, but is somewhat recognized by my Mac Pro ( I also have windows in case it is necessary ). Thanks In advance for your help in making my device more than an ( very expensive!) brick.
Sincerely,
davidrazd