Lenovo Vibe P2 is coming

- Slightly better processor
- 4GB - more RAM
- OLED or AMOLED display

Lenovo Vibe x2 Root Problem

Hello Everyone,
I am a noob in this world and now i am stuck in very bad situation i rooted my phone today but when i turned on my mobile it was freezing and restart over over and over again. I searched quite a bit for this issue nothing found so i looked for new directions to restore with old rom so i download the default rom from internet and installed it, it worked but my phone could not receive any calls or messages, i am using mobile data it works fine but when ever i try calling it shows the dialing screen and then it suddenly exits from the dialing screen, same it is with the messages sending it starts sending but suddenly reports that message was not sent.

Please help me i am doing this for this whole day and i have got no solution please help me

[Help] can't install custom recovery on Lenovo Vibe C at all!

Hello
A newbie here ...
My new phone "Lenovo Vibe C (A2020)" does not allow me to install any kind of custom recovery on it, I tried the following methods ...
1- SP Flash Tool: doesn't detect my phone at all, even after installing all drivers (Qualcomm, MTK, Etc ,,, ).
2- Adb and fastboot: whenever I try to flash a recovery, it only shows (waiting for a device) command, even after being detected by "adb devices" command, and showing device ID.
3- flashing apps: I used flashify and thrasher, at the beginning they both show a successful flashing process, up until rebooting to recovery, then only shows "Lenovo" logo for a second right before turning the phone off.
that's what i did, any help would be appreciated.
Note: the phone isn't even indexed in the site's database ... I wonder why!

lenovo vibe shot baterry problem

hello,
I recently bought this phone, but baterry cant last even 6-7 hours. even at night, when i sleep and dont use phone, baterry drains around 30% !!!. most of that is CPU usage:confused:.
Does anyone knows or had simillar problem, and how to fix it, is it software or something else.....
Also, device heats up very fast, after 15-20 min od moderate usage, his back is very very hot.
Thanks.

question about lenovo vibe k5 plus

Please delete this

question about lenovo vibe k5 plus

My device(vibe k5 plus ) has clock rate of 1.50mhz.
But when I benchmark my phone with antutu. First four core never cross 1113mhz and last four core never cross 800mhz. I monitor All this from CPU z and also check antutu graph, CPU never cross 1113 mhz.
So please someone explain this.
Ps-battery temp goes beyond 42c. this is normal or not.

vibe p1 battery & charging

This phone gives amazing screen on time,rocket charging is reaaaaaally quick,charges from 0 to 100 within 90 to 100 minutes sometimes within less time than that.actually I'm using lenovo vibe p1 turbo(3gb RAM) really worth buying,especially if u are a heavy user like me,this phone never lets u down.i continuously played mkx ,dead trigger 2 ,gta SA games and screen time was 5 hours 30 minutes ,I'm really impressed,w with normal browsing ,just youtubing, I got 50 minutes screen on time with 100% battery .max screen on time I got was 8 hours+ and battery was still 17 percent( in power management details,it showed 4 hours remaining,by all this think u got idea about this mammoth 5000 mah battery........hope u all find this useful,bye:fingers-crossed:

VIBE PURE

Time Appropriate Greetings fellas!!! :D

VIBE_PURE is based on the latest VIBEUI ROW Indian release for K3 Note by Lenovo and so it has the bugs that will be present in that release. This rom is developed with the idea to have the best of both words which is the simplicity of AOSP and the features of lenovo tied to K3 note, its a learning process for me and those who wish to test it or modify it are welcome to do it but please credit me and people in my credit section and also please comment in the thread what u have done to correct the bug because in the end all we need is Fully functioning ROM and knowledge of how to do it....

Known Bugs
Whatever the bugs listed for the latest ROW Release.

this is a stable release....rooted, busybox, gapps, xposed and few MultiLanguage...
Has VR mode and Dolby Atmos
With VIBEUI Dev 1629 Kernel...
Sticked to ROW Modem...
Thermal Files from Leishui 1629 Rom
Has Android Nify Xposed module installed which can be enabled in Xposed Installer
MiXplorer and Noozy Music Player Preinstalled.


WARNING TEST THIS AT UR OWN RISK....BACKUP EVERYTHING U HAVE BEFORE DOING ANYTHING...
Boot into TWRP recovery
Wipe Dalvik Cache, Cache, System and Data
Flash the ROM
Reboot....

POST 1 Intro
POST 2 Changelog

ROM DOWNLOAD - VIBE PURE Stable 1
SCREENSHOTS


Created : 26/07/2016
Last Release : 26/07/2016
State : STABLE

Credits :
Lenovo for phone and software, LeiShui, chainfire for supersu, osm0sis for busybox installation finally SuperR for SuperR's Kitchen with which the rom is made.

xposed for lenovo vibe k5 or vibe k5 plus

I install xposed but it always crashes Google play services,anyway to got it work or how to send log to xposed dev for solutions.
plus I also try systemless xposed
I am noob so please give detailed information

Vibe K5 Review

Hello Friends , This is my first post here and i hope i can help you guys

Lenovo Vibe K5

Hello friends

Today I am here to sort the Lenovo Vibe K5

This device is a good cost-benefit but not supporting some heavier games, the battery is too bad (can overheat in a few minutes of use), the camera can handle some things, the available memory is reasonable, have enough RAM memory to support various games, have a good chipset can support heavier games,with Android 5.1.1 operating system with no provision for the update to Android Marshmellow, Fast charging in which the original charger with the hard charging time of 1h-2h depending on usage

He has a Octacore processor (Quad-core 1.5 GHz Cortex-A53 + Quad-core 1.2 GHz Cortex-A53)
and a Qualcomm Snapdragon chipset 616 MSM8939v2 (But in CPU Z appears a Qualcomm SnapDragon chipset 615 1,50Ghz) , he had some FPS drops in heavier games like Asphalt 8 and World Of Tanks Blitz in this case it can not be run on Ultra
he had the following FPS in the following games

WoT Blitz 30fps (medium)
Asphalt 8 27fps
MCSM(Minecraft Story Mode) 40fps

Some games require a lot of heavy battery, and this phone disappoints in this topic, it has a lithium battery with the amperage 2750MaH lasting at most one days with moderate use and 5 hours of use more intensive

The Camera also disappoints, it has a 13 megapixel resolution (back) and 5 megapyxels (front), the camera does not fit in places with little or too much light focus is poor

The phone has 16GB of storage and 2GB of RAM and users can just enjoy eleven gigas (11GB) of this device


Summary:

Mobile is good for games can reach up to 50FPS in some, has expandable internal storage of 16GB to 128GB but may enjoy only 11GB, Camera is bad not adapting well to the environment or not focusing well on the object

xposed for lenovo vibe k5 plus

I rooted my phone by twrp recovery, but when I install xposed framework, after installation Google play services always crashes .
so what's going on. I search whole xda but no luck.
sorry for bad English

xposed for lenovo vibe k5 plus

finally I rooted my phone with twerp recovery then I install xposed framework but after Google play services stopped working pooped out every time I install many old version of xposed but nothing work,
I search whole forum with no luck.
please fix this issue dev, what log I attach.
sorry for dirty English

Lenevo Vibe Z2 Pro issue with sim card

Hi i recently bought a Lenevo Vibe Z2 pro 6 inch smartphone, i appreciate its a 2014 phone but was purchased as brand new from a uk ebay power seller

When i turn the phone on . it does two things alternately on one boot .. the sim 2 had an exclamation mark next to it and sim 1 has an x .. mobile settings such as apn are not active and accessible and the sim settings also cannot be altered, one the 2nd boot ... both sims have an x next to them and the sim settings are active, and also the apn settings which incidently are pre populated to the correct provider vodafone uk, they are even the correct pay as you got internet settings

In Sim Settings how the Sim is Categorised as UNKNOWN .. the ebay advert states the phone is unlocked to all networks in the uk . including vodafone .. .. however is it ??

I have an honor 6 plus which is practically the same as this phone and the sim is fine in that one .. which is unlocked and also chinese ... do you think its a problem with the rom installed by the seller .. the wifi was a problem initially but after three minutes it eventually came on and then the phone rebooted about 7 times before it worked fine . the phone has also since had instances of spontaneously rebooting

I am currently in the process of negotiating to return the item .. unless anyone has any ideas ??? the lenevo forum has clearly moved on from this phone as no reply was forthcoming there

Vibe S1 bettery drain problem .

Hi, i've lenovo vibe s1 running marshmallow. The battery performance is so poor. Even in standby the battery drops 20-25% within 3-4 hour !
İ've noticed that wifi is strangely consume so much power (screenshot below).
Tried hard reset but the same issue persist.

any suggestion? thanx in advance

Attached Thumbnails

 


 

VibeUI 2.5 ROW repack for TWRP / k920 Vibe Z2 pro (all versions)

VibeUI 2.5 (International) build S288 for both versions of the smartphone.
The choice of the version of a device (ROW or Chinese) is made at installation

Installation.
Method 1. Habitual
Install via TWRP. Attention! TWRP 3.0.2 does not support Aroma installer! Recommended TWRP 2.8.6.
Before archive installation surely we make 4 wipe: data, system, dalvik cache, cache.

Method 2. Unusual
Install via FlashFire. TWRP is not required. Installation is shown on screenshots.
Download

Attached Thumbnails

 


 


 


 


 


 


 


 


 

Lenovo VIbe Shot or Motorola Moto X(2nd gen)?

Hey guys I'm new here, and I just want to ask, which is better among the two. I read a lot of good reviews about Moto X, but its down side was the camera and the battery life. Whereas in Vibe Shot, they said that it has a good camera and I think better battery life. I'm more focus on the camera and the battery life, which do you think has better of it?

vibe shot 6.0 update and root and xposed

1st way :


Pulled full OTA file for Lenovo Vibe Shot - z90a40 ROW

Installation Procedures for the official rekaveri following:
Clean, not rutirovannaya and the changed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the file update.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select English and tychem to Install update.zip
What follows is some question about the installation. Select YES
The installation process is 100% dlitelnyy.Posle installation still some time to think. Do not panic.
After installation is complete, select the restart system . The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS

2nd way :


How to install TWRP rekaveri for the following:
Installed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the archive TWRP_lenovoota.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select Install and update the file with.
Make wipes are cache, dalvik-cache, data and phone.
After installation is complete, reboot the system. The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS

down load files : https://cloud.mail.ru/public/36qb/qhqsDGNVr

3rd: for who have problem with 1st & 2nd

1- download thise file :http://lenovo-forums.ru/topic/19311-...comment=497835

2- Installing the firmware using QFIL on the Lenovo device based on Qualcomm chips:

(A)
We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
set himself "flasher" - QPST.2.7.422.msi ;
install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z

(B)
Completely turn off your device , and then we press the volume up key (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008

3-Just install the firmware: -

(A)
Run the program QFIL
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn)
, for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose prog_emmc_firehose_89XX.mbn file and click "Open" . then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".
http://lenovo-forums.ru/uploads/mont...1419253051.png

(B)
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.
http://lenovo-forums.ru/uploads/mont...1419253052.png



for root :::::::::

1ST : Unlock BootLoader

1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/mont...046c561c4a.png

6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mont...73461cc42e.png

7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/mont...480a6df072.png

8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:

Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/mont...b724004305.png

10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.

12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .

13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/mont...f936037988.png

14.So all of this unlocking process is completed successfully .

files need links :
http://lenovo-forums.ru/applications...t.php?id=56368

2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )

Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!

links : http://lenovo-forums.ru/applications...t.php?id=56391

Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.


3rd : install su from twrp

su.zip link : https://download.chainfire.eu/921/Su...etrieve_file=1


----how to install xposed for vibe shot

apk :http://forum.xda-developers.com/atta...6&d=1435601440

http://dl-xda.xposed.info/framework/...dk23-arm64.zip



that's all


;)

[MOD] Transparent notification bar for Lenovo Vibe K5 [A6020l36][5.1.1]

Hello guys!
Here's my simple customization to share with you.
I removed the blue background Vibe K5 notification bar and let transparent.

Tutorial:

.Install TWRP recovery by @Shreps

.Download and Move the TransparentSystemui.zip to sd card

.Enter the recovery mode (with the phone turned off, press power + volume up, then select Recovery)

.Click in Install and select TransparentSystemui.apk

.Reboot System and enjoy :D

Attached Thumbnails

 


 

Wifi issue with lenovo vibe x3

Hey guys,
I have a lenovo vibe x3 device 32 GB 3GB ram and when I had a notification for the last update wifi didn't work or download it. But wifi works with all applications and when I open system update the mobile says network connection failed. And when i open mobile data it works without problem. Help me please :(

Lenovo Vibe K4 Note Invalid IMEI Problem

Hey Friends.
I Flashed my k4 note using sp flash tool, by choosing Format+Download option, my IMEI no. is erased.
It Shows invalid imei. :confused:
Please help me to solve this problem.